Energy Storage for High Speed Trains: Economical and Energy Saving Evaluation
DOI:
https://doi.org/10.59615/ijie.2.4.66DOR:
https://dorl.net/dor/20.1001.1.27831906.2022.2.4.7.2Keywords:
Energy Storage, Railway, Regenerative Braking Energy, Energy EfficiencyAbstract
Increasing the utilization rate of regenerative braking energy in rail systems is one of the ongoing applications increasing in significance in recent years. In rail systems, braking is made with two ways, mechanical and electrical. While the energy released due to mechanical braking cannot be recovered, the energy released due to electrical braking can be reused as regenerative braking energy. This regenerative braking energy varies according to the dynamics of the system and it can be given back to the grid, stored in storage devices or burned in resistors (it is not desired). This study develops a novelty algorithm within the scope of this objective and provides the calculation of the regenerative braking energy recovery rate and then making a decision for storage or back to grid of this energy. Afterwards, the regenerative braking energy was calculated with the help of this algorithm for Eskisehir-Ankara and Ankara-Eskisehir trips in two different passengers (load) scenarios, using the YHT 65000 high-speed train, which was chosen as a case study. Then, with a decision maker added to this classical regenerative braking energy algorithm, it will be decided whether this energy will be stored or forward back into the grid for the purpose of providing non-harmonic energy to the grid.
Downloads
References
• AKBAYIR, Ö., & ÇAKIR, F. H. (2017). Enerji verimliliği için tren direnci formüllerinin karşılaştırılması. Mehmet Akif Ersoy Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 8(Özel (Special) 1), 112-126.
• Albrecht, T. (2010). Reducing power peaks and energy consumption in rail transit systems by simultaneous train running time control. WIT Transactions on State-of-the-art in Science and Engineering, 39.
• Başeğmez, B. (2018). Türkiye şartları için uygun tren direnci formüllerinin belirlenmesi (Master's thesis, ESOGÜ, Fen Bilimleri Enstitüsü).
• Ceraolo, M., Lutzemberger, G., Frilli, A., & Pugi, L. (2016, June). Regenerative braking in high speed railway applications: Analysis by different simulation tools. In 2016 IEEE 16th International Conference on Environment and Electrical Engineering (EEEIC) (pp. 1-5). IEEE.
• Ceraolo, M., Lutzemberger, G., Meli, E., Pugi, L., Rindi, A., & Pancari, G. (2018). Energy storage systems to exploit regenerative braking in DC railway systems: Different approaches to improve efficiency of modern high-speed trains. Journal of Energy Storage, 16, 269-279.
• Ellwanger, G. (2005). Externe Kosten des Verkehrs jetzt internalisieren!. ETR. Eisenbahntechnische Rundschau, 54(1-2), 62-67.
• Falvo, M. C., Lamedica, R., Bartoni, R., & Maranzano, G. (2010, June). Energy saving in metro-transit systems: Impact of braking energy management. In SPEEDAM 2010 (pp. 1374-1380). IEEE.
• Gao, Z., Chin, C. S., Woo, W. L., & Jia, J. (2017). Integrated equivalent circuit and thermal model for simulation of temperature-dependent LiFePO4 battery in actual embedded application. Energies, 10(1), 85.
• García, P., Fernández, L. M., Torreglosa, J. P., & Jurado, F. (2013). Operation mode control of a hybrid power system based on fuel cell/battery/ultracapacitor for an electric tramway. Computers & Electrical Engineering, 39(7), 1993-2004.
• Gee, A. M., & Dunn, R. W. (2014). Analysis of trackside flywheel energy storage in light rail systems. IEEE Transactions on Vehicular Technology, 64(9), 3858-3869.
• Hentschel, F., Mueller, K., & Steiner, M. (2000, May). Energy storage on urban railway vehicles. In Proceedings of the UIC Energy Efficiency Conference, Paris.
• Irena, E. (2017). storage and renewables: costs and markets to 2030. Abu Dhabi.: Int Renew Energy Agency.
• Kebede, A. A., Kalogiannis, T., Van Mierlo, J., & Berecibar, M. (2022). A comprehensive review of stationary energy storage devices for large scale renewable energy sources grid integration. Renewable and Sustainable Energy Reviews, 159, 112213.
• Khodaparastan, M., & Mohamed, A. (2018, June). Modeling and simulation of regenerative braking energy in DC electric rail systems. In 2018 IEEE Transportation Electrification Conference and Expo (ITEC) (pp. 1-6). IEEE.
• Killer, A., Armstorfer, A., Diez, A. E., & Biechl, H. (2012, August). Ultracapacitor assisted regenerative braking in metropolitan railway systems. In 2012 IEEE Colombian Intelligent Transportation Systems Symposium (CITSS) (pp. 1-6). IEEE.
• Killer, A., Armstorfer, A., Diez, A. E., & Biechl, H. (2012, August). Ultracapacitor assisted regenerative braking in metropolitan railway systems. In 2012 IEEE Colombian Intelligent Transportation Systems Symposium (CITSS) (pp. 1-6). IEEE.
• Kulworawanichpong, T. (2015). Multi-train modeling and simulation integrated with traction power supply solver using simplified Newton–Raphson method. Journal of Modern Transportation, 23(4), 241-251.
• Lin, F., Li, X., Zhao, Y., & Yang, Z. (2016). Control strategies with dynamic threshold adjustment for supercapacitor energy storage system considering the train and substation characteristics in urban rail transit. Energies, 9(4), 257.
• Møller, K. T., Jensen, T. R., Akiba, E., & Li, H. W. (2017). Hydrogen-A sustainable energy carrier. Progress in Natural Science: Materials International, 27(1), 34-40.
• Moskowitz, J. P., & Cohuau, J. L. (2010, September). STEEM: ALSTOM and RATP experience of supercapacitors in tramway operation. In 2010 IEEE Vehicle Power and Propulsion Conference (pp. 1-5). IEEE.
• Najafi, S. E., Nozari, H., & Edalatpanah, S. A. (2022). Artificial Intelligence of Things (AIoT) and Industry 4.0–Based Supply Chain (FMCG Industry). A Roadmap for Enabling Industry 4.0 by Artificial Intelligence, 31-41.
• Nozari, H., Ghahremani-Nahr, J., Fallah, M., & Szmelter-Jarosz, A. (2022). Assessment of cyber risks in an IoT-based supply chain using a fuzzy decision-making method. International Journal of Innovation in Management, Economics and Social Sciences, 2(1).
• PORTUGAL, P. (2016). Relatório de sustentabilidade. Obtido a, 10.
• Pugi, L., Grasso, F., & Rossi, G. (2018, June). Energy simulation of tramway systems, simplified and efficient models. In 2018 IEEE International Conference on Environment and Electrical Engineering and 2018 IEEE Industrial and Commercial Power Systems Europe (EEEIC/I&CPS Europe) (pp. 1-6). IEEE.
• Pugi, L., Malvezzi, M., & Conti, R. (2014). Optimization of traction and braking subsystems with respect to mission profile. Civil-Comp Proceedings, 104.
• Ratniyomchai, T., Hillmansen, S., & Tricoli, P. (2014). Recent developments and applications of energy storage devices in electrified railways. IET Electrical Systems in Transportation, 4(1), 9-20.
• Sabihuddin, S., Kiprakis, A. E., & Mueller, M. (2014). A numerical and graphical review of energy storage technologies. Energies, 8(1), 172-216.
• Sertsöz, M. (2021). A Novelty Energy Storage Algorithm for High Speed Trains: Economical and Energy Saving Evaluation.
• SERTSÖZ, M., & FİDAN, M. (2020). A critical approach to the particle swarm optimization method for finding maximum points. Journal of Scientific Perspectives, 4(2), 111-122.
• Shan, R., Reagan, J., Castellanos, S., Kurtz, S., & Kittner, N. (2022). Evaluating emerging long-duration energy storage technologies. Renewable and Sustainable Energy Reviews, 159, 112240.
• Sheikholeslami, M. (2022). Numerical analysis of solar energy storage within a double pipe utilizing nanoparticles for expedition of melting. Solar Energy Materials and Solar Cells, 245, 111856.
• Spiryagin, M., Wolfs, P., Szanto, F., Sun, Y. Q., Cole, C., & Nielsen, D. (2015). Application of flywheel energy storage for heavy haul locomotives. Applied energy, 157, 607-618.
• Steiner, M., Klohr, M., & Pagiela, S. (2007, September). Energy storage system with ultracaps on board of railway vehicles. In 2007 European conference on power electronics and applications (pp. 1-10). IEEE.
• Steiner, M., Scholten, J., Steinegger, H., & Jenewein, T. (2001). Energy Storage Systems for Improved Efficiency of Railway Vehicles. WCRR, Köln.
• Transportation, B. (2009). MITRAC Energy Saver. EcoActive Technology, Propulsion & Controls, 1-4.
• Wang, X., Luo, Y., Qin, B., & Guo, L. (2022). Power dynamic allocation strategy for urban rail hybrid energy storage system based on iterative learning control. Energy, 245, 123263.
• Whitman, D. L., & Terry, R. E. (2012). Fundamentals of engineering economics and decision analysis. Synthesis Lectures on Engineering, 7(1), 1-219.
Published
How to Cite
Issue
Section
License
Copyright (c) 2022 Mine Sertsöz
This work is licensed under a Creative Commons Attribution 4.0 International License.
Owner
