Economic assessment model of the silver recycling industry

Economic assessment model

Authors

  • Malek Hassanpour * Osmania University

DOI:

https://doi.org/10.59615/ijie.1.3.20

DOR:

https://dorl.net/dor/20.1001.1.27831906.2021.1.3.3.9

Keywords:

Economic assessment, Silver recycling, Industry

Abstract

Silver Element (SE) is exploited in making coins, jewelry, silverware, electronics devices, medical and decorative stuff, confectionery products, mirrors and glass making, and making up photography films, etc. Because of its antibacterial properties, the SE is utilized in the pharmaceutical industry. One of its important characteristics is high resistance to chemical solvents. The SE has historically had a special position and value among the people because of its precious status and its widespread use, especially in the field of medicine. The Silver Metal (SM) has been used as a trading agent rather than money. The present research investigated the silver recycling industry from photography films and their belongings to deploy an economic assessment model empirically. By the current research, an economic assessment model was developed that can be assigned to assess any engineering & industrial project in the screening step of project identification via the Environmental Impact Assessment (EIA) plan. Also, the developed model can be employed to estimate the economic indices of breakeven point, economic value-added, and time of return on investment. The configuration of the model is highly emphasized in electronic software's.

Downloads

Download data is not yet available.

References

Anthony, P., Behnoee, B., Hassanpour, M., Pamucar, D. (2019). Financial performance evaluation of seven Indian chemical companies. Decision Making: Applications in Management and Engineering, 2(1), 19-37. https://doi.org/10.31181/dmame1902021a

Afshariantorghabeh, S. (2019). Technical, Environmental, and Economic Analysis of Required Pretreatments for Recycling Different Wastes to be utilized as Raw Material for Producing Geo-composite. Master’s Thesis Lappeenranta-Lahti University of Technology LUT School of Energy Systems 2019. http://urn.fi/URN:NBN:fi-fe2019110436489

Cantuaria, M.L., E. S. Nascimento., A. F. Almeida Neto., O. A. A. dos Santos., M. G. A. (2015). Vieira. Removal and Recovery of Silver by Dynamic Adsorption on Bentonite Clay Using a Fixed-Bed Column System. Adsorption Science & Technology, 33(2), 91-103. https://doi.org/10.1260/0263-6174.33.2.91

Cormos, C.C. (2018). Techno-Economic Evaluations of Copper-Based Chemical Looping Air Separation System for Oxy-Combustion and Gasification Power Plants with Carbon Capture. Energies, 11, 1-17. Doi: 10.3390/en11113095.

De Oliveira, L.S.S., Lima, M.T.W.D.C., Yamane, L.H., Siman, R.R. (2020). Silver recovery from end-of-life photovoltaic panels. Detritus, 10, 62-74. https://doi.org/10.31025/2611-4135/2020.13939

Danthurebandara, M., Van Passel, S., Machiels, L., Acker, K.V. (2015). Valorization of thermal treatment residues in Enhanced Landfill Mining: environmental and economic evaluation. Journal of Cleaner Production, 99, 275-285. http://dx.doi.org/10.1016/j.jclepro.2015.03.021.

Erku, M.D., Anuradha, JA., Yimam, A. (2017). Silver recovery from waste x-ray photographic films collected from hospitals in Addis Ababa. EEA, 35, 2-7.

Folens, K., Huysman, S., Hulle, S.V., Laing, G.D. (2017). Chemical and economic optimization of the coagulation-flocculation process for silver removal and recovery from industrial wastewater. Separation and Purification Technology, 179, 145–151.

Fukai, I., Mishra, S., Pasumarti, A. (2017). Technical and economic performance metrics for CCUS projects: Example from the East Canton Consolidated Oil Field, Ohio, USA. Energy Procedia, 114, 6968 – 6979. Doi: 10.1016/j.egypro.2017.03.1838.

Hilliard, H.E. (2003). Silver Recycling in the United States in 2000. U.S. Geological Survey, Reston, Virginia: Version 1.0

Ho, N.A.D., Babel, S. (2020). Spontaneous reduction of low-potential silver (I) dithiosulfate complex in bioelectrochemical systems for recovery of silver and simultaneous electricity production. Environmental technology, 41(23), 1-15. https://doi.org/10.1080/09593330.2019.1597171

Hassanpour, M. (2019). Evaluation of Iranian Mining and Aggregate Industries. Industrial Engineering Journal. 12(3), 1-15. DOI: 10.26488/IEJ.12.3.1179.

Iran Small Industries and Industrial Parks Organization (ISIPO). (2019). http://isipo.ir/

Graedel, T.E., Allwood, J., Birat, J-P., Buchert, M., Hagelűken, C. (2011). What Do We Know About Metal Recycling Rates? USGS Staff - Published Research, 15(3), 355-366. https://doi.org/10.1111/j.1530-9290.2011.00342.x

Grigoletto, J.C., Segura-Munoz, S.I., Barbosa-Junior, F., Sanches, S.M., Takayanagui, A.M.M. (2011). Silver Discharged in Effluents from Image-Processing Services: a Risk to Human and Environmental Health. Biol Trace Elem Res, 144:316–326. https://doi.org/10.1007/s12011-011-9096-8

Gutierrez, L., Aubry, C., Cornejo, M., Croue, J-P. (2015). Citrate-coated silver nanoparticles interactions with effluent organic matter: influence of capping agent and solution conditions. Langmuir, 31, 32, 8865-8872. DOI: 10.1021/acs.langmuir.5b02067.

Karwasz, A., Dostatni E, Diakun, J., Grajewski, D., Wichniarek, R., Stachura, M. (2016). Estimating the cost of product recycling with the use of Eco design support system. Management and Production Engineering Review. 7(1), 33–39. DOI: 10.1515/mper-2016-0004.

Kozlov, A.V. (2017). Technical and economic assessment of vehicle recycling cost in the Russian federation. International Journal of Mechanical Engineering and Technology, 8(10), 82–92. http://www.iaeme.com/IJMET/index.asp.

Khtiarzadeh, A. (1999). An ideal planning approach to the end-product processing model.4th International Conference on Industrial Engineering, Tarbiat Modares University, Tehran, Iran, 1-12.

Kumar, P., Dhakad, R., Devra, A.S., Kumbhkar, P. (2020). Silver Recovery from X-Ray Film Waste: A Review. International Journal for Research in Applied Science & Engineering Technology (IJRASET). 8, IX, 1288-1292.

Marinković, J., Korać, M., Kamberović, Ž., Matić, I. (2006). Recycling of silver from exposed x-ray films. Acta Metallurgica Slovaca, 12, 262 - 268.

Mirzaee, M., Ahmadi, M.H., Acıkkalp, E., Rahimzadeh, M. (2019). Sensitivity analysis of technical and economic parameters for natural gas management in enhanced oil recovery projects. International Journal of Low-Carbon Technologies, 14, 1–9. doi:10.1093/ijlct/cty047

Nakiboglu, N., Toscali, D., Nisli, G. (2003). A Novel Silver Recovery Method from Waste Photographic Films with NaOH Stripping. Turk J Chem, 27, 127-133.

Rupiasih, N.N., Suharta, W.G., Sumadiyasa, M., Fernanda, D.D., Imas, M.Y. (2020). The potential of the composite membranes Ch-AgNP to recover silver from X-ray film processing wastes. The 9th International Conference on Theoretical and Applied Physics (ICTAP), 1572, 012081, 1-7. doi:10.1088/1742-6596/1572/1/012081

Reis, S. (2005). Costs of Air Pollution Control Analyses of Emission Control. Springer-Verlag Berlin Heidelberg Printed in Germany, 1-197. https://doi.org/10.1007/b137551

Rabl, A. (1996). Discounting of long-term costs: What would future generations prefer us to do? Ecological Economics, 17, 137–145. https://doi.org/10.1007/978-3-642-47035-6_6

Søndergaard, R.R., Espinosa, N., Jørgensen, M., Krebs, F.C. (2014). Efficient decommissioning and recycling of polymer solar cells: justification for use of silver. Energy Environ. Sci, 3, 1–7. https://doi.org/10.1039/C3EE43746A

Shevale, V.B., Dhodamani, A.G., Delekar, S.D. (2020). Catalytic Reclamation of Silver Present in Photographic Waste Using Magnetically Separable TiO2@CuFe2O4 Nanocomposites and Thereof Its Use in Antibacterial Activity. ACS Omega, 5, 1098−1108. https://pubs.acs.org/doi/10.1021/acsomega.9b03260.

Sánchez-Ortiz, W., Aldana-González, J, Manh, T.L., Romero-Romo, M., Mejía-Caballero, I., Ramírez-Silva, M.T., Arce-Estrada, E.M., Mugica-Álvarez, V., Palomar-Pardavé, M. (2021). A Deep Eutectic Solvent as Leaching Agent and Electrolytic Bath for Silver Recovery from Spent Silver Oxide Batteries. Journal of the Electrochemical Society, 168, 016508, 1-8. DOI: 10.1149/1945-7111/abdb01

Vasalos, I.A., Lappas, A.A., Kopalidou, E.P., Kalogiannis, K.G. (2016). Biomass catalytic pyrolysis: process design and economic analysis. WIREs Energy Environ, 5, 370–383. Doi: 10.1002/wene.192.

Van Der Spek, M., Ramirez, A., Faaij, A. (2017). Challenges and uncertainties of ex ante techno-economic analysis of low TRL CO2 capture technology: Lessons from a case study of an NGCC with exhaust gas recycle and electric swing adsorption. Applied Energy, 208, 920–934. http://dx.doi.org/10.1016/j.apenergy.2017.09.058.

Yang, Y., Brammer, J.G., Wright, D.G., Scott, J.A., Serrano, C., Bridgwater, A.V. (2017). Combined Heat and Power from the Intermediate Pyrolysis of Biomass Materials: Performance, Economics and Environmental Impact. Applied Energy, 191, 639-652. https://doi.org/10.1016/j.apenergy.2017.02.004.

Downloads

Published

2021-10-07

How to Cite

Hassanpour, M. (2021). Economic assessment model of the silver recycling industry : Economic assessment model . International Journal of Innovation in Engineering, 1(3), 20–37. https://doi.org/10.59615/ijie.1.3.20

Issue

Section

Original Research