A review on the MCUSUM Charts in Detecting the Shifts of the Process with Comparison Study
DOI:
https://doi.org/10.59615/ijie.3.2.30DOR:
https://dorl.net/dor/20.1001.1.27831906.2023.3.2.4.2Keywords:
MCUSUM Charts, Comparison Study, Average Run LengthAbstract
In this paper, we compare the performance of different MCUSUM methods presented in the literature. First, we briefly introduce MCUSUM methods in multivariate normal distribution. In order to evaluate their performance, we present a comparative study with simulation. Furthermore, we compare the average out-of-control run length of MCUSUM methods under different scenarios of mean shifts, standard deviation shifts, and correlation shifts. The results of the simulation study show that MCUSUM methods have different efficiency in detecting process shifts and based on the required application, the appropriate MCUSUM chart should be selected.
Downloads
References
• Akhavan Niaki S. T., Fallah Nezhad M. S. (2009), Decision-making in detecting and diagnosing faults of multivariate statistical quality control systems, The International Journal of Advanced Manufacturing Technology volume 42, pages713–724, https://doi.org/10.1007/s00170-008-1636-9.
• Bersimis, S. and Psarakis, S. and Panaretos, J. (2007), Multivariate Statistical Process Control Charts: An Overview, Quality Reliability Engineering International, 23,pp. 517-543, https://doi.org/10.1002/qre.829.
• Crosier, R.B. (1988), Multivariate Generalizations of Cumulative Sum Quality-Control Schemes, Technometrics, 30(3), pp. 291-303, https://doi.org/10.1080/00401706.1988.10488402.
• Ghahremani, A., Mohseni, A. (2021). Investigating the key indicators of implementing car paint quality management in the automotive industry . International Journal of Innovation in Engineering, 1(3), 65–73. https://doi.org/10.59615/ijie.1.3.65
• Healy, J.D. (1987), A note on multivariate CUSUM procedures, Technometrics, 29, pp. 409-412(1987), https://doi.org/10.1080/00401706.1987.10488268.
• Hotelling, H. (1947), Multivariate quality control. In: Eisenhart, Hastay, Wallis (eds) Techniques of statistical analysis. McGraw-Hill, New York, NY.
• Jackson, J.E. (1991), A User Guide to Principal Components. Wiley: New York,.
• Jafarian-Namin S., Fallahnezhad M. S., Tavakkoli-Moghaddam R., Salmasnia A., Fatemi Ghomi S. M. T.(2021), An integrated quality, maintenance and production model based on the delayed monitoring under the ARMA control chart, Journal of Statistical Computation and Simulation, Volume 91(13), Pages 2645-2669, https://doi.org/10.1080/00949655.2021.1904241.
• Pignatiello, J.J. and Runger, G.C. Comparisons of Multivariate CUSUM Charts, Journal of Quality Technology, 22(3), pp. 173-186, https://doi.org/10.1080/00224065.1990.11979237.
• Rasay H., Fallahnezhad M. S., Zaremehrjerdi Y. (2019), An integrated model of statistical process control and maintenance planning for a two-stage dependent process under general deterioration, European Journal of Industrial EngineeringVol. 13(2), pp 149-177, https://doi.org/10.1504/EJIE.2019.098508.
• Rasay H., Fallahnezhad M. S., Zaremehrjardi Y. (2018), Application of Multivariate Control Charts for Condition Based Maintenance, Volume 31(4), International Journal of Engineering, TRANSACTIONS A: Basics, Pages 597-604.
• Sullivan, J.H., and Woodall, W.H. (1996), A comparison of multivariate control charts for individual observations, Journal of Quality Technology, 28(4), pp. 398-408, https://doi.org/10.1080/00224065.1996.11979698.
• Woodall, W.H. and Ncube, M.M. (1985), Multivariate CUSUM quality control procedures, Technometrics, 27, pp. 285-292, https://doi.org/10.2307/1269710.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2023 Mohammad Saber Fallahnezhad, Amir Ghalichehbaf
This work is licensed under a Creative Commons Attribution 4.0 International License.
Owner
